Description

Chuck size : 12.7mm Square Drive Pin-hole type

Application : M10 bolt (Tensile bolt) M12 bolt (Normal-Tensile bolt) M14 bolt (Normal bolt)

Maximum torque (F mode, fastening 3 sec.) : approx.185 N·m(M16 bolt)

Shut-off range : approx. 25—100 N·m

Torque setting : 30 stage + F (without torque setting mode)

Snug torque detection mode setting : L1: For lighter loads during fastener run down L2: For prevailing torque during run down and varying joint rate applications

No load speed (unit : rpm) : 0 ~ 2300

Impact per minute : 0 ~ 3200

Weight*1 (inc. battery) : EYFB43B·EYFB42B approx. 1.5kg EYFB41B approx. 1.3kg

Length : 172mm

Height : 248mm (EYFB43B·EYFB42B), 231mm (EYFB41B)

Width : approx. 59mm (Width of battery pack: approx. 75mm)

LED light : (ON/OFF switch, Light turns off after five minutes automatically)

Tightening confirmation lamp : (OK fastening: Green lamp, NOK fastening: Red lamp)

Retightening prevention function : (Possible to set between 0 ~ 3 sec.. 0.1 sec. per stage)

Battery indication lamp : (3 stages)

Work capacity / Fastening speed : <M12: 71 N·m, Stage: 22> (EYFB43B) approx. 670 pcs/pack, approx. 0.9 sec/1pcs (EYFB42B) approx. 780 pcs/pack, approx. 0.9 sec/1pcs (EYFB41B) approx. 350 pcs/pack, approx. 0.9 sec/1pcs

Charging time : (Battery pack EYFB43B, Charger EY0L82B) Usable Charge: approx. 45 min. Full Charge: approx. 60 min (Battery pack EYFB42B, Charger EY0L82B) Usable Charge: approx. 50 min. Full Charge: approx. 60 min
(Battery Pack EYFB41B, Charger EY0L82B) Usable Charge: approx. 35 min. Full Charge: approx. 40 min